GRP Cable trays and ladders, connections, related accessories and structures

Cable trays are used for cabling in oil and gas sites, petrochemical plants, power plants, commercial and industrial buildings, factories, etc. Cable trays are made of different materials for different weather conditions. For cold and mountainous weather, cable trays are usually made of galvanized sheet (galvanized fabric sheet), for hot and humid areas, hot galvanized, and for acidic and humid areas, stainless steel or GRP.

AAC also produces GRP cable trays and ladders to increase the durability of them in acidic and humid environments. GRP products have a cheaper price and higher resistance than stainless steel. Other advantages of GRP materials include: long life, high resistance, corrosion resistance, fire resistance, light weight, easy installation, electrical conductivity and cheap.

Technical specifications of GRP cable trays
The materials used to produce this product are polyester resin, vinylester resin or phenolic resin. Cable trays can be made with a length of up to 3 meters and their width is usually between 5 and 60 cm. Their bending angle is 90 and 45 degrees. They can be presented in several colors. The mentioned numbers are typical for projects and according to the needs of the client, cable trays can be produced in other dimensions and sizes.

Cable tray connections
The design and production of cable tray connections are done based on the bending radius of the cable. The initial proposal of AlamAfroze Co for the production of fittings is usually a radius of 300 mm, but it is also possible to produce fittings in any radius.

The difference between cable tray and cable ladder is the amount of air flow. In the cable ladder, the air flow is very high and causes the cable to cool down. For this purpose, the cable ladder is usually used in the electrical part, and the cable tray is used for the cables of precision instruments.

Technical specifications of GRP cable ladders
The production range of cable ladders is from 50 mm to 600 mm wide. The height of the cable ladder wall depends on the type and size and number of cables that are placed in it. For cable ladders with a width of 50 to 100 mm, the height of the wall is considered to be less than 100 mm, and for cable ladders with a width of more than 100 mm, the height of the wall is considered to be 100 mm. However, AlamAfroze Co is able to produce cable ladders with other specifications according to the client's needs.

The materials used in the production of GRP cable ladders are polyester resin, vinyl ester resin, or phenolic resin. Cable ladders can be built with a length of up to 3 meters and their width is usually between 15 and 100 cm. Their bending angle is 90 and 45 degrees and the bending radius is 30 cm. They also can be presented in several colors. The mentioned numbers are typical for projects and according to the needs of the client, cable ladders can be produced in other dimensions and sizes.